Call us toll-free

: The balanced equation for this reaction can bewritten as follows.

Plants cells contain a number of structures that are involved in the process of photosynthesis:

Approximate price


275 Words


Energy may trigger a chemical reaction, as in photosynthesis

Review and relevance of thin films, various thin film processing techniques, an introduction to vacuum science and Technology, Thin-film evaporation processes, Plasma and Ion Beam processing of Thin Films, Chemical Vapor Deposition, Non-vacuum thin film processing techniques, Substrate Surfaces and Thin-film Nucleation, Epitaxy, Microstructural characterization of thin films and surfaces, Interdiffusion, Reactions and phase transformations in thin films, Overview of various properties of thin films and their relation to their microstructures.

Enzymes are the catalysts of chemical reactions taking place in living organisms....

Most metals respond to heat treatment, but the treatment temperatures are unique for different metals. A great EEI is to examine the effects of annealing, quenching, and tempering on metals. A steel bobby pin would be a useful starting point but you'd need to control the amount of heating and quenching and see how the properties vary with changes. Ask yourself "what type of treatment produces the hardest metal; and the strongest metal"? The male Blood Elf (below) from the is carrying a quenching bucket. Nothing to do with chemistry however.

For example, in a Daniel cell, the chemical reaction between ..

Pottery is one of the oldest human technologies and art-forms, and remains a major industry today. It is made by forming a clay body into objects of a required shape and heating them to high temperatures in a kiln to induce reactions that lead to permanent changes, including increasing their strength and hardening and setting their shape. Firing produces irreversible chemical changes in the body. As a rough guide, firing temperatures are in the range of about 1000 to 1400°C. However, the way that ceramics mature in the kiln is influenced not only by the peak temperature achieved, but also by the duration of the period of firing.

A good EEI (especially if you do Senior Art) might be to examine the hardness of the fired clay as a function of temperature; or as a function of time. If you were more adventurous you could look at different atmospheres within the kiln. One word of caution. This is a chemistry EEI and chemistry must be at its heart to distinguish it from applied technology or art. A pyrometric cone (see photo below) is a spike-shaped piece of clay used to measure temperature in a kiln when firing pottery. Cones have carefully calibrated melting points, indicated by their cone number. They are used to visually determine when a kiln has reached a desired temperature, by observing when a given cone in an observation port starts to droop. They are very attractive too.

It is known that for water to be electrolysed, it has to have an ionic substance added such as sodium chloride. You could see how the efficiency of the electrolysis is affected by the voltage across the electrodes, and by the concentration of salt present. You'd need to relate your results to the E° value for the non-spontaneous reaction and what happens at voltages lower than that. You may look at the changing rate of generation of the gases as time passes or at the volume after a set time. It's up to you. Does the car ad below make sense? Is it chemically feasible?

Balanced chemical equation for photosynthesis | …

Electrolysis is commercially highly important in the separation of elements from naturally-occurring sources such as ores using an electrolytic cell. It involves the passage of an electric current through an ionic substance that is either molten or dissolved in a suitable solvent, resulting in chemical reactions at the electrodes and separation of materials. It is used in the production of metals such as aluminium, lithium, sodium, potassium and magnesium, and of non-metals such as chlorine. The electrolysis of water produces hydrogen and oxygen and that could make an interesting EEI.

You could imagine what UHDPE and VLDPE stand for. High-density polyethylene resin has a greater proportion of crystalline regions than low-density polyethylene. The size and size distribution of crystalline regions are determinants of the tensile strength of the end product. HDPE, with fewer branches than MDPE or LDPE, has a greater proportion of crystals, which results in greater density and greater strength. LDPE has a structure with both long and short molecular branches. With a lesser proportion of crystals than HDPE, it has greater flexibility but less strength.

Order now
  • Equation for the overall chemical reaction of photosynthesis

    Write a balanced equation for the reaction that occurs when ammonia burns in air to form nitrogen oxide and water.

  • physical states of the substances in a chemical reaction.

    Photosynthesis is the process of converting light energy into chemical potential energy and storing it as starch....

  • Doing chemical reactions is the main focus of chemistry ..

    Solar Radiation Key Discoveries of Photosynthetic Process Structure of Chloroplasts Function of Chloroplasts A.

Order now

The overall balanced chemical equation for the reaction ..

A great way to get copper in close contact with the zinc is to deposit copper metal directly on to the zinc by a displacement reaction. To do this you would dip the piece of zinc into a solution of copper sulfate and a coating is immediately deposited. If you dipped identical pieces of zinc strip into a copper sulfate soution - but each to a different depth (0 cm, 1 cm, 2 cm ....) and for the same time you would get different areas of coating. Then react the strips individually with hydrochloric acid and measure the rate by whatever method you like (change in mass due to lost hydrogen, amount of gas produced, temperature change, titration the final solution against NaOH).

process of photosynthesis, chemical and word equation and ..

As a trial, I took a 1 cm3 cube of marble and placed it in 200 mL of 7.5%w/v citric acid solution (pH 1.8) at 50°C (with stirring) and after 60 minutes it had lost 0.30 g. Why not make up a synthetic soft drink from phosphoric or citric acid. What concentration will you choose? How does the reaction rate or the extent of the reaction vary with concentration? Does temperature have much effect on the rate? Does the product - calcium citrate or calcium phosphate - impede the progress of the reaction; that is, how soluble are the products (one is 4 times as soluble as the other). How do you measure the progress of the reaction (amount of carbonate consumed or change in titratable acidity of the solution)? Oh, the possibilities are endless. And you can drink the left-over Coke and rot your teeth a bit more at the same time. A perfect EEI.

This tutorial introduces photosynthesis

Aesthetics, places and narratives: The dialogue between anthropology and arts, political contexts, social revolutions, economic inequalities, development and environmental problems; Ethnographic mediums: Different modes of producing an ethnographic work (text, film, art works etc.); Displacement, hybridity and fluidity: The recent researches and projects studying displacement and movement across borders. Studies on cultural hybridity, fluidity of cultural references and how anthropology today also focus on movement and inter-connections and not only in fixed contexts; Senses of belonging: The study of senses of belonging as essential to understand the personal experiences behind historical processes; Violence and war: Anthropology of war and how can we study violence in order to understand what are the meanings of violent upheavals; Questioning colonialisms, memory and postcolonial critiques: The critiques of the remains of colonialism in the actual world order, how postcolonial countries have been building official historic memories; Ruins and ruination: How the research on ruins and the processes of ruination can direct us towards questioning the consequences of historical processes in the daily lives of the ones who live with the consequences of those processes; Intimacy and narratives, aesthetics of resistance: Thinking on how personal narratives, the notion of intimacy and aesthetics can broaden the research on resistance and dissent; Disrupting the archive: The archive as ethnographic field, questioning how archives are built and preserved, and how this opens space for debates on official histories and alternative stories.

Chemical Reactions and Equation - CBSE Class 10 …

Across disciplines, technologies and social sciences: Engaging on thinking how crossing disciplinary borders enables us to approach societal issues in a more comprehensive mode. What are the links between technologies and social sciences and how anthropology is fundamental to the social use of technologies?; Collaborative research: Introduction to methods incorporating different disciplines and distinct approaches, in order to organize research under different perspectives; A first approach to a village - its territory: Introductory fieldwork visits to the villages to be studied, in order to have a first sense of the realities we can observe. Under the notion of ‘territory’, we can start to discuss what happens in that place; Different layers of a map, mapping: Geography, urbanism, social and spatial structure’ – research on different subjects found in the villages where field work is done. How in the same place, a village, we find different realities and many topics to analyze, and how we can build different maps focusing on different aspects; Population, social world, social use of space: Engagement with ethnographic methods to discuss what are the meanings and contexts of the realities observed. Space and its use as translating the social universe of the studied villages; Constraints and problems, developmental matters: Observation and analysis of societal issues present in the villages - from water management to electrical connections, education, health or agricultural production. Cross these analyses with the discussions on ethnographic methodology to better understand the social and cultural contexts of the issues; Creative brainstorming – problems and solutions: Engaging with the recent anthropological research on infrastructure and development, in order to broaden a creative approach to the research projects using different media of registering and thinking: drawings, maps, photographs, film.

Order now
  • Kim

    "I have always been impressed by the quick turnaround and your thoroughness. Easily the most professional essay writing service on the web."

  • Paul

    "Your assistance and the first class service is much appreciated. My essay reads so well and without your help I'm sure I would have been marked down again on grammar and syntax."

  • Ellen

    "Thanks again for your excellent work with my assignments. No doubts you're true experts at what you do and very approachable."

  • Joyce

    "Very professional, cheap and friendly service. Thanks for writing two important essays for me, I wouldn't have written it myself because of the tight deadline."

  • Albert

    "Thanks for your cautious eye, attention to detail and overall superb service. Thanks to you, now I am confident that I can submit my term paper on time."

  • Mary

    "Thank you for the GREAT work you have done. Just wanted to tell that I'm very happy with my essay and will get back with more assignments soon."

Ready to tackle your homework?

Place an order